Satellite / network destination

Antarctica VoIP rates

Prepaid SIP termination to Antarctica from $0.121 per minute across 5 published prefix routes and 5 operator groups. Rates effective July 16, 2026.

Lowest fixed-line rate$0.121/min
Lowest mobile rateNot published
Billing increment1/1
Rates effective2026-07-16

Increments in use on Antarctica: 1/1 (5 routes). Displayed values are source “from” rates; billing increments, traffic type, route availability, KYC and commercial margin all affect the final customer offer.

Operator breakdown

Antarctica routes by network

RouteFromUp toIncrementPrefixesExample prefixes
Casey Base $0.121 1/1 1 +67212
Davis Base $0.121 1/1 1 +67210
Fixed $0.121 1/1 1 +6721
Macquarie Base $0.121 1/1 1 +67213
Scott Base $0.121 1/1 1 +67211
Connecting

How to call Antarctica from your platform

Dial Antarctica numbers in E.164 format: country code +6721 followed by the national number, with no local trunk prefix, spaces or brackets. Most platforms expect digits only; some require a leading plus. Confirm the exact dial pattern during testing.

CloudyVoice works with any SIP-capable endpoint — softphones, IP desk phones and ATAs, IP-PBX platforms such as Asterisk, FreeSWITCH and 3CX, call-centre dialers including ViciDial, and VOS softswitch deployments. Authentication is by SIP registration or approved IP address.

Before sending production traffic to Antarctica, test across several networks in the destination and check two-way audio, caller ID behaviour, post-dial delay, answer supervision and billing. The route-quality guide explains the method.

Questions

Frequently asked questions

How much does it cost to call Antarctica over VoIP?

CloudyVoice publishes Antarctica termination from $0.1212 per minute, with fixed-line routes from $0.1212. These are source “from” rates across 5 prefix routes; final pricing depends on your traffic profile, volume and quality requirements.

What is the country dialling code for Antarctica?

Antarctica uses country code +6721. Dial in E.164 format — the country code followed by the national number, without a local trunk prefix, spaces or brackets.

Why are mobile rates to Antarctica different from fixed-line rates?

Mobile and fixed networks in Antarctica are billed separately, with each operator range priced individually. The prefix dialled determines which rate applies.

What billing increment applies to Antarctica calls?

The most common increment on Antarctica routes is 1/1. Written as first/subsequent, 60/60 bills whole minutes, 60/1 bills the first minute in full then per second, and 1/1 bills per second throughout. On short calls the increment affects effective cost more than the headline rate.

Which devices can I use to call Antarctica?

Any SIP-capable endpoint: softphones such as Zoiper, MicroSIP or Linphone; SIP desk phones; analog phones behind an ATA; IP-PBX platforms including Asterisk, FreeSWITCH and 3CX; call-centre dialers such as ViciDial; and VOS softswitch deployments. Both username/password registration and IP authentication are supported.

Do I need an account to see Antarctica rates?

No. Every rate on this page is public. An account is needed only to send traffic, and outbound routes are enabled after traffic review confirms your destinations, expected volume and lawful use case.

Similar pricing

Related destinations

$0.122/min
+262 · 52 routes
$0.120/min
+297 · 13 routes
$0.120/min
+962 · 6 routes
$0.119/min
+501 · 2 routes

Ready to call Antarctica?

Create an account, complete traffic review, and top up from $10. Every Antarctica rate above is published before you register.