$7.200/min
+88232 · 1 routes
Country code +882
Emsat VoIP rates
Prepaid SIP termination to Emsat from $7.200 per minute across 20 published prefix routes and 2 operator groups. Rates effective July 16, 2026.
Lowest fixed-line rateNot published
Lowest mobile rateNot published
Billing increment60/60
Rates effective2026-07-16
Increments in use on Emsat: 60/60 (20 routes). Displayed values are source “from” rates; billing increments, traffic type, route availability, KYC and commercial margin all affect the final customer offer.
Operator breakdown
Emsat routes by network
| Route | From | Up to | Increment | Prefixes | Example prefixes |
|---|---|---|---|---|---|
| Satellite | $7.200 | — | 60/60 | 2 | +882, +88213 |
| Satellite Special Services | $7.200 | — | 60/60 | 18 | +8821303, +8821307, +8821309, +8821310, +8821313, +88213200361, +8821323, +8821324, +8821333, +8821339, +8821343, +8821348 … |
Connecting
How to call Emsat from your platform
Dial Emsat numbers in E.164 format: country code +882 followed by the national number, with no local trunk prefix, spaces or brackets. Most platforms expect digits only; some require a leading plus. Confirm the exact dial pattern during testing.
CloudyVoice works with any SIP-capable endpoint — softphones, IP desk phones and ATAs, IP-PBX platforms such as Asterisk, FreeSWITCH and 3CX, call-centre dialers including ViciDial, and VOS softswitch deployments. Authentication is by SIP registration or approved IP address.
Before sending production traffic to Emsat, test across several networks in the destination and check two-way audio, caller ID behaviour, post-dial delay, answer supervision and billing. The route-quality guide explains the method.
Questions
Frequently asked questions
How much does it cost to call Emsat over VoIP?
CloudyVoice publishes Emsat termination from $7.2000 per minute. These are source “from” rates across 20 prefix routes; final pricing depends on your traffic profile, volume and quality requirements.
What is the country dialling code for Emsat?
Emsat uses country code +882. Dial in E.164 format — the country code followed by the national number, without a local trunk prefix, spaces or brackets.
Why are mobile rates to Emsat different from fixed-line rates?
Mobile and fixed networks in Emsat are billed separately, with each operator range priced individually. The prefix dialled determines which rate applies.
What billing increment applies to Emsat calls?
The most common increment on Emsat routes is 60/60. Written as first/subsequent, 60/60 bills whole minutes, 60/1 bills the first minute in full then per second, and 1/1 bills per second throughout. On short calls the increment affects effective cost more than the headline rate.
Which devices can I use to call Emsat?
Any SIP-capable endpoint: softphones such as Zoiper, MicroSIP or Linphone; SIP desk phones; analog phones behind an ATA; IP-PBX platforms including Asterisk, FreeSWITCH and 3CX; call-centre dialers such as ViciDial; and VOS softswitch deployments. Both username/password registration and IP authentication are supported.
Do I need an account to see Emsat rates?
No. Every rate on this page is public. An account is needed only to send traffic, and outbound routes are enabled after traffic review confirms your destinations, expected volume and lawful use case.
Similar pricing
Related destinations
$7.200/min
+884 · 1 routes
$7.200/min
+885 · 1 routes
$7.200/min
+887 · 1 routes
$7.200/min
+889 · 1 routes
$0.685/min
+675 · 9 routes
Ready to call Emsat?
Create an account, complete traffic review, and top up from $10. Every Emsat rate above is published before you register.